Conveyor belt maintenance methods
Conveyor belt in use and storage, should be kept clean to avoid direct sunlight or rain and snow immersion, to prevent contact with acid, alkali, oil, organic solvents and other substances, and away from the heating device more than one meter.
The storage temperature should be kept between 18-40 ℃, and the relative humidity should be kept between 50-80%.
During storage, the conveyor belt must be placed in rolls, not folded, and should be turned once a quarter during storage.
Conveyor belts of different types and specifications should not be used together, and their joints are best bonded.
The type, structure, specification and number of layers of the conveyor belt should be selected reasonably according to the conditions of use.
The running speed of the conveyor belt should not be greater than 2.5 meters/second, and the materials with large block and wear and the use of fixed discharge devices should be used at low speed as far as possible.
The relationship between the diameter of the transmission drum and the distribution layer of the conveyor belt, the matching of the transmission drum and the reversing drum, and the requirements for the groove Angle of the roller should be reasonably selected according to the design regulations of the conveyor.
The feeding direction should follow the running direction of the conveyor belt. In order to reduce the impact of the material falling on the conveyor belt, the chute should be adopted to reduce the falling distance of the material. The receiving section of the conveyor belt should shorten the distance between rollers and use buffer rollers as leakage materials. Soft and moderate baffle plate should be used for belt compliance, so as to avoid hard baffle plate and scratch the belt surface of the conveyor belt.
Xiamen steadily rising conveyor belt co.,ltd provides you with one-stop conveyor belt and conveyor services, looking forward to cooperating with you